While enjoying the journey, suddenly a flat tire due to hit a nail or similar sharp object. We must replace the leaking tire with the spare tire and brought to the workshop to patch it. Is 'suffering' we end up? The answer is: Yes, because now 'suffering' that led to our car tires!
What was done by builders patched tires? Tires that had been intact now pierced with a skewer tool for your little finger. Tires that had been leaked just the tip of the needle, make a hole like the mouth of the pipe. Wow, was the fate kiamatlah our car tires. 's Known as patched is manifold tubeless tires or no tires on.
Once punctured, the rope into the hole fibers disumbatkan tires with enough stretch potential to further damage the tire. Starting from rubber material, woven yarn to be woven wire torn and broken apart, so that the tires we become weaker. This form of doom from our tire patched after paying 8 to 10 thousand silver.
For the first time the patch might still be able to survive for several weeks or months. But if the leak again at the same point, which could no longer be clogged with fibers that rope. Well, forced to use an inner tube.
With a little effort and rubber glue, you can avoid further damage and prolong the life of your tires. Pump up your tires full of air, then turn slowly while flushing the surface with water. After the air bubble was a sign of the hole, circle the leaking area with paint or the like as a marker.
Remove air from the tires and washing to clean the area around the hole, and then leaked it wiped with a dry cloth. Once dry thoroughly, tetesi hole with any brand of rubber glue, so that the glue seeped into the hole. Help infiltration of glue into the tire with jabbing sharp objects such as a pin or small nail into the hole clean, dry and wait for a few minutes.
The final step, pump the tires up to full air and flush with water slowly into the hole that has been patched, to ensure that the hole has been tertambal well. Patching process done, from beginning to end with great care and caution, so you do not need to repeat it in case of failure.
Some advantages of this model such fillings are:
- Strong and anti-failure. Power adhesive or adhesive rubber adhesive force is higher than the cohesive power of the rubber itself. So this point becomes more powerful than the others. No part may fall off or bounce, as only using glue. Moreover, the patched section is a very small hole.
- There is no weakening at all in the tire network.
- It adds that affect the mass balance.
- There will never need help in all age tires. Using the increasing cost of tires, wheels add complicated settings, reliability and lower the risk of failure is much higher.
- Is not dependent on other people and artisans patched tires and / or tools are more complex that can physically damage the tires.
- The condition of the tires remained intact, as if the tires have never experienced a leak. No tissue damage rubber, yarn and tire cord.