Floods or high rainfall makes water droplets are likely infiltrate
everywhere. In our car, the first part exposed to water is at the vanguard front. Besides as a sweetener, the lattice on the bumper as well as removing the possibility of garbage into the engine room.
Usually, garbage is often in the form of plastic and leaves, which in eventually accumulate in the evaporator to the radiator. Indeed this problem quite mild, but although some may interfere with its function as a coolant.
Although this problem quite light but at the precision needed to clean it fully. Because if not careful will destroy its function. The following steps, namely first caught taking trash to the evaporator and the radiator by using our hands carefully. The second step that is if the water contains mud, then spray evaporator grille and the radiator by using steam, but do not use a sharp spray because of high water pressure will cause the lattice bending evaporator. Let's not put off cleaning during the rainy season, because the dirt will accumulate and even automatic cleaning more difficult.